$33.68 – $39.80
These Drive Punches are forged from finest special carbon steel, carefully hardened, with polished barrel. The hole tapers back from the cutting edge so that the punchings clear freely. Available in variety of sizes.
These punches should be used on an Osborne No. 603 Cutting pad. The use of an Osborne wooden mallet or rawhide hammer is recommended. Steel hammers are not recommended.
Osborne no. 147
| Osborne No. | Size | Hole diameter (in) | Weight each (oz) | UPC No. |
| 147-0 | 0 | 5/64 | 2 | 51410 |
| 147-1 | 1 | 7/64 | 2 | 51412 |
| 147-2 | 2 | 1/8 | 2 | 51414 |
| 147-3 | 3 | 9/64 | 2 | 51416 |
| 147-4 | 4 | 5/32 | 2 | 51418 |
| 147-5 | 5 | 11/64 | 2 | 51420 |
| 147-6 | 6 | 3/16 | 2 | 51422 |
| 147-7 | 7 | 7/32 | 3 | 51424 |
| 147-8 | 8 | 1/4 | 3 | 51426 |
| 147-9 | 9 | 9/32 | 3 | 51428 |
| 147-10 | 10 | 5/16 | 3 | 51430 |
| 147-11 | 11 | 3/8 | 4 | 51432 |
| 147-12 | 12 | 13/32 | 4 | 51434 |
| 147-13 | 13 | 7/16 | 6 | 51436 |
| 147-14 | 14 | 15/32 | 6 | 51438 |
| 147-15 | 15 | 1/2 | 7 | 51440 |
| 147-16 | 16 | 9/16 | 9 | 51442 |
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | 0, 1, 10, 11, 12, 13, 14, 15, 16, 2, 3, 4, 5, 6, 7, 8, 9 |
| Hole diameter | 1/2, 1/4, 1/8, 11/64, 13/32, 15/32, 3/16, 3/8, 5/16, 5/32, 5/64, 7/16, 7/32, 7/64, 9/16, 9/32, 9/64 |
